English
French 
German
Molybdenum Alloy
-
We use our high purity sinter & infiltrate process to manufacture superior quality molybdenum – coppercomposite material. Molybdenum copper is a great alternative to tungsten copper for weight sensitive applications.
-
We use our high purity sinter & infiltrate process to manufacture superior quality molybdenum – copper composite material. Molybdenum copper is a great alternative to tungsten copper for weight sensitive applications. The combination of high purity raw materials and high temperature hydrogen sintering using no additives yields the highest thermal conductivity available for this composite material system.
-
Molybdenum Copper heat sinks is a composite made from Mo and Cu, Similar to W-Cu, CTE of Mo-Cu can also be tailored by adjusting the composition. But Mo Cu is much lighter than W-Cu, so that it is more suitable for aeronautic and astronautic applications.
-
Molybdenum-Tungsten is the alloying of molybdenum with tungsten leads to better corrosion resistance against molten zinc. We produce standardized MoW alloys with 30 weight% of tungsten (MOLY B60) and 50 weight% W.
-
Any question about the machine will be replied within 24 hours. Welcome you to be our new client!
-
Molybdenum has several alloys. For the purpose of this brochure, only alloys that are predominantly molybdenum will be considered.
-
Molybdenum has several alloys. For the purpose of this brochure, only alloys that are predominantly molybdenum will be considered.
-
Molybdenum’s prime alloy is TZM. This alloy contains 99.2% min. to 99.5% max. of Mo, 0.50% Ti and 0.08% Zr with a trace of C for carbide formations. TZM offers twice the strength of pure moly at temperatures over 1300’C. The recrystallization temperature of TZM is approximately 250’C higher than moly and it offers better weldability.
